BHS COMPLETO SINGLE PHASE
INTEGRATED MULTIFUNCTION CONTROL PANEL
BHS Completo is a Motor for springs-balanced sectional doors with integrated control panel, digital
limits and pre-wired pushbutton with 7 mt cable.
The worm gear makes the BHS irreversible.
FUNCTIONS OF INTEGRATED CONTROL PANEL
-Automatic opening
-Automatic closing
-Standard safety beams QCF4
-Optoelectric safety edge QCSE2
-Safety edge 8k2
-Traffic lights
-24Vac contact
-Radio control
OVERLOAD SAFETY FACTOR
Motor overload safety factor = 4 x the nominal motor amperage because the starting current of the BHS can reach these levels for short periods.
MANUAL OPERATION
In installations of BHS with hand crank or hand chain override, the door and the self braking gear con struction remain always inter-connected. The door will never fall down if a spring breaks. In installations of BHS with decluth device the door and the self-braking worm gear are disconnected du ring the manual operation. In this case the worm gear no longer sustains the door and a spring safety brake is required.
HOLDING TORQUE The BHS drive unit is capable of holding the weight of the door when the spring breaks preventing the door from falling down. The holding capability is the admissible load the worm gear construction can bear.
EUROPEAN DIRECTIVESBHS is made in accordance with product standards EN 13241-1 Doors- and EN 12453 Safety for power operated doors.
| 230 V 50 Hz | Torque (Nm) | Speed (rpm) |
|---|---|---|
| BHS70MCF | 70 | 21 |
| BHS70MDF | 70 | 21 |
Notes
MDF: Single phase, declutch device, integrated Multifunction control panel and electronic encoder limit.
MCF: Single phase, hand chain override, integrated Multifunction control panel and electronic encoder limit.
